BG07 Luxury Gold Boom Barrier – High-Speed Automatic Parking Gate with Adjustable Speed and Anti-Collision Features

BG07 Luxury Gold Boom Barrier – High-Speed, Adjustable, and Intelligent Parking Gate System Product Features:

1. Adjustable Speed: Customize the opening and closing speed of the barrier gate according to your requirements.
2. Changeable Arm Direction: Easily switch the arm direction between left and right to fit your site layout.
3. Manual Operation During Power Outages: Manually open and close the arm, with automatic locking for security when power is restored.
4. Wireless Remote Control: Conveniently control the barrier gate using a wireless remote.
5. Photocell I/O Port Output: Supports photocell integration for enhanced safety.
6. Loop Detector Anti-Collision Output: Prevents collisions by detecting vehicles in the barrier’s path.
7. Open and Close Control Input: Allows remote or automated control of the barrier’s operation.
8. 12V Traffic Light Output: Includes a dedicated output for connecting traffic lights.
9. Traffic Light Signal Output: Provides signal output for traffic management systems.
10. Open and Close Limit Signal Output: Ensures precise control with limit signals for the barrier’s movements.
11. RS485 Communication Input for Counting/Fleet Management: Integrates seamlessly with fleet management and counting systems.
12. 24V Battery Input Port: Compatible with 24V backup battery systems for uninterrupted operation.
13. Adjustable Delay Close Arm Function: Set the delay for closing the arm from 1 to 300 seconds for optimized traffic flow.
14. Speed Deceleration: Smooth operation with adjustable speed deceleration for the arm during opening and closing.
15. One-Key Arm Type Setting: Easily configure arm type and corresponding speed with a single key.
16. Automatic Reverse Function: The arm automatically reverses if an obstacle is detected, with adjustable force settings.
17. Anti-Collision Alarm: Additional sensors and alarms can be installed for enhanced safety against collisions.

Spring Installation, Dismantlement, and Adjustment:

1. Vertical Positioning: Keep the boom in the vertical position (open) and tighten the two M12 lock-nuts.
2. Balance Spring Adjustment: Adjust the balance spring’s tightness using an M8*140mm screw to achieve optimal balance, then manually position the brake lever at a 45-degree angle.
3. Coordinated Spring Adjustment: Ensure all three springs are adjusted in coordination for smooth and balanced operation of the brake lever.
4. Brake Lever Swing Adjustment: If the brake lever swings excessively during lifting, loosen the spring and adjust repeatedly until smooth operation is achieved.

Configuration List：

• Barrier Gate – 1 unit
• Remote Controllers – 2 units
• Product Manual – 1 copy
• Certificate of Conformity – 1 copy

---

application scenario：

With night breathing light DC brushless motor BG07 digital road gate is a series of new-generation intelligent road gates that can adapt to modern “safe, fast, efficient and high quality” management, which is carefully designed and produced by our company; its high standard, high quality, high integration characteristics, fashionable appearance and its unique visual charm give people a sense of dignity and elegance, and make the matching with it more complementary effect, which is the first choice for supporting occasions such as parking lots, hotels, schools, garden villa communities, enterprises and public institutions. It is the first choice for parking lots, hotels, schools, garden villa communities, enterprises and institutions.

1. Simple: the crank linkage mechanism drive, reducing institutional failure, low noise, no pollution, no maintenance
2. High sensitivity magnetic limit control system, low-voltage DC control, safe and reliable, limit accuracy
3. Long rod gate has special manual and automatic starting device for power failure.
4. Special balancing mechanism, always keep the starting pole vertical, falling pole level, and smooth, non-equivalent speed operation eliminates the phenomenon of the gate pole lifting process and starting the phenomenon of the gate pole accelerated too fast.
5. The chassis adopts powder coating, anti-ultraviolet rays, sun exposure is not easy to change color.
6. The road gate pole adopts high-strength aluminum alloy tube, outsourced vibration-resistant and anti-collision foam rubber, the surface with yellow and black reflective film, eye-catching reflective effect can warn the driver in time.
7. advanced motor, with overheating protection, machine temperature is greater than 135 degrees automatically cut off the power supply, the motor will not easily burn out!
8. Service life of more than 5 million times.

The gate consists of three parts, namely, chassis, movement and control part. The movement part is mainly to realize the upward and downward movement of the gate, which is composed of motor, speed reducer, four-link mechanism, balancing mechanism, gate lever, etc.; the control part is mainly to control the direction and position of the movement of the gate, i.e., to control the rising, falling and stopping of the gate. There are two ways to control the gate, i.e. manual and automatic control. Manual control of the gate is the rise and fall of the gate pole by the hand control button or remote control to operate; automatic control of the gate is the rise of the gate pole by the hand control \ remote control \ control machine control, down by the sensor detection after the automatic fall pole. Breathing light with night DC brushless motor Bounce back when blocked anti-smash function

---

1. Adopting brushless DC motor drive, high energy efficiency ratio, the temperature rise of the motor does not exceed 20℃ during long time continuous operation; 2. The transmission mechanism adopts worm gear reducer + four-link mechanism, simple structure and smooth operation; 3. The motor speed is controlled by detecting the position signal of the Hall switch installed on the motor, with precise control; 4. Determine the operation of the motor by detecting the motor’s movement curve to determine whether the movement of the gate lever is obstructed; 5. optical and mechanical double safety position detection, to ensure that the product will not produce false action; 6. the machine runs smoothly, low noise, long service life, no need for daily maintenance and repair; 7. The control part can increase the storage battery to ensure that the product automatically moves to the open state when the power is out; 8. The control part is equipped with overload protection circuit, guaranteeing automatic protection when running overload; 9. Different speeds can be set through the dip switches, which is convenient for users to choose the settings; 10. The product can be connected to external sensors and gate bar operation indicator lights; 11. When the external gate bar operation indicator light is connected, the light turns green when the gate bar rises and red when the gate bar falls. After power on the motor rotates, the reducer decelerates, and the crank linkage mechanism transforms the circular motion output from the reducer into a swing in the range of 90 degrees, thus realizing the up and down motion of the gate pole and the lifting and lowering of the gate pole. In the process of movement, the use of photoelectric switch to realize the automatic positioning of the horizontal and vertical position.